Arduino DMX Shield - DFRobot
DiscoHAT for Raspberry Pi is a HAT board that has 8 isolated input switches, an isolated DMX output connection and LED strip control for individual LEDs like ws2801. DiscoHAT was developed to be used together with QLC+, an Open Source light and sound control software that is absolutely AMAZING.
Announcing : Open source Raspberry Pi RDM Responder, DMX
onfiguring DMX universes. ola is one part of the larger open lighting project, which aims to build high-quality, free software for the entertainment lighting industry. Build your own DMX tester: With Open Lighting Architecture and Raspberry Pi By Michael hesMond Figure 1 – What you need
Le Raspberry Pi sur scne avec Robe - Framboise 314, le
/25/2013ber eine USB-Tastatur abgespielt
Raspberry Pi DMX512 generted with DMA I/O via pigpio library
Open source USB DMX with 1500V optical isolation and compatibility with software that supports Enttec USB Pro.
Contrleur DMX avec un Raspberry - Forum FS Generation
A standard $35 Raspberry Pi computer runs a program that generates theonscreen interface, and sends commands via USB to a DMX controller continuously. The DMX controller then sends DMX commands to the light fixture to change the color.
Raspberry Pi as a DMX light controller
Christopher Tolan Yes, this schematic is designed for use with the Raspberry Pi — OSC
OLA on Raspberry Pi - Open Lighting Project
A standard $35 Raspberry Pi computer runs a program that generates the onscreen interface, and sends commands via USB to a DMX controller continuously. The DMX controller then sends DMX commands to the light fixture to change the color.
DMX interface for Raspberry pi with usb (FT245RL) - BitWizard
Raspberry Pi B+ Hardware Reset Button via Spring Test Pin (Not Included) DiscoHAT has 8 isolated GPIO inputs + isolated DMX output. DiscoHAT. DiscoHAT is a small board allowing you to do computer controlled lights, See RPi Expansion Boards: Expansion boards by manufactuer. References